Chu trung hieu
Hanoi,HN
Summary
Total work 28 years working experience in IT field, QA field, consultant supervisor field and technical training, production but most impression field is engineering field when stating as process engineer then program manager then IE supervisor for more than 6 years. Engaged in mechanical engineering job for 2 years then work in development new EMI product. Part cost analysis, BOM, route of each product. Support product phase builds from T0, trial and ramp up and mass production. Work with planning team to manage 5M on mobile manufacturing to ensure output adapt shipment on lean product. Lean / 6 sigma experience. Work with other departments on a factory to get training requirement then build up suitable training system to meet their requirement. Good communication / leading skill. Skilled on CAD 2D. Responsible for root cause analysis studies and corrective action plan implementation Assist postproduction quality/cost improvement activity related to 4M, fixtures and processes.
Overview
28
28
years of professional experience
Work History
Manufacturing Engineering Supervisor
Lairdtech Vietnam LLC.
Bắc Ninh city, Việt Nam
07.2017 - Current
- Start at role off process engineer then management project team develop new product (EMI product) then Manufacturing Engineering Supervisor and report to Senior Engineering Manager.
- Now manage all Engineering job and team report direct to site GM.
- Define, plan and manage project milestone activities.
- Manage and direct a product development design or project team consisting of multiple engineering disciplines.
- Manage and coordinate activities between departments to meet product development or project requirements from design stage to mass production.
- DFM, design/build new process if requirement.
- ECN control.
- FMEA study for control all critical process.
- Calculate process capacity/cycle time /plan improvement.
- Monitor whole process study UPH/process yield rate/product quality.
- Manage cost targets as set by Senior Management staff.
- Simultaneously set priorities/direction for assigned projects or programs.
- Act as the technical customer interface.
- Make quote of part, part cost analysis.
- BOM and route maintenance on QAD (production management system).
- Sample and material PR of first project and follow.
- Specification of product provide.
- Part code active on QAD system.
- Special process follows: Foam in place, Tape die-casting…
- Generate/facilitate documentation per engineering procedures.
- Adheres to quality and safety systems or maintenance of quality and safety standards.
- LEAN and 6 sigma improvement on process / production…
- A business of DuPont Electronics & Industrial. Website: http://www.lairdtech.com
Production Analysis
Microsoft Mobile Vietnam LLC.
01.2015 - 07.2017
- Management Production Analysis Team, collect data from PMT tool and make report about productivity, (UPH, UPPH), scrap, downtime, run rate, HC utilization and quality issues OBA, process audit to report to Production Unit Manager (Production Head).
- Production KPI controller, manage and analysis all Production KPI from MF, SMT, BA, FA, BTR to CTR, and DT, R&R report to Production Head.
- Work with cross-functional teams to plan, analyze and manage production activities.
- Develop production plan and schedule to ensure continuous operations.
- Process all planned orders for timely completion.
- Prepare reports concerning downtime, equipment repairs, and delays.
- Analyze consumption and production rates and determine production efficiency.
- Attend weekly meetings to discuss about production issues and updates.
- Monitor the execution of production plan and identify deviations.
- Communicate production status and error updates to management on regular basis.
- Analyze customer requirements and set production expectations.
- Develop standard procedures to optimize workflow.
- Evaluate issues, analyze root causes and derive solutions.
- Generate production reports for management and customers.
- Work with Managers to prioritize and schedule work orders.
- Monitor and manage the availability of materials, equipment, resources and electricity.
- Recommend improvements to maintain production integrity, consistency and quality.
- Fushan Technologies Vietnam LLC.
Technical Training Manager
Nokia Vietnam LLC.
05.2013 - 12.2014
- Manage Technical Training Team, report to Production Unit Manager (Production Head) about all activities of Training Team.
- Defining and setting both internal & external targets for training team aligned with business objectives & targets.
- Conducts regular audits of training session and provides developmental feedback/coaching to trainers when required.
- Work with HRD Manager and Business Groups to understand the technical training requirements.
- Measure and manage the Technical Training Team performance.
- Maps the requirements to solutions in collaboration with the operation team.
- Management technical training for all DL operators based on recruitment plan, multi skill for them in order meet the Production requirement.
- Work with FPM to build new product, study and improvement on assembly process to reduce risk about assembly skill when develop new product at the factory.
- Support Production team on all other activities relate to HC, manpower.
- Microsoft Mobile Vietnam LLC.
Training Manager
Sumi-Hanel Wiring system Co., Ltd.
11.2002 - 05.2013
- Management Training Center and report to Production Manager and HR Manager. Training Center is under Production Department.
- Management activities training skill and technical for new operators.
- Periodic training skill and evaluation skill for all DL operators (quarterly) submit evaluation result to HR for quarterly reward and recognition.
- Evaluation best line about productivity, quality, management for monthly award in the factory.
- Management and training soft skill, management skill for management team in the factory based on Corporation’s (parent company) training program.
- Create Training System, schedule and programs for training Operators, Leader, Supervisor, Staff, Manager in the factory.
- Prepare and submit to get approval the company’s annual training plan, Training System… control, management the training budget.
- Design and hold the technical skill contest in the factory based on plan from Corporation Company (Olympic Skill Contest).
- Prepare and contact vendor holding the advance training course about soft skill for management team.
- ISO management and control about training aspect in the factory.
IT Specialist and Quantity Surveyor Engineer
Louis Berger International Inc.
05.1999 - 11.2002
- Office administrator and Network administrator (NT4 and Windows 2000), control and maintenance computers, Internet and E-mail service, office’s machines etc.
- CAD Operator in road design, draw and design highway construction by AutoCAD and Softdesk.
- Final check quantity construction for interim payment of all contract in our project report to Project Manager.
- Final check Interim Payment of all contract in our Project, Prepare Monthly Interim Payment Report on schedule and payment… report to Project Manager.
OQC Team Leader
LG Electronic Vietnam
11.1997 - 04.1999
- Supervision, management and Control the Quality of Outgoing team (main products are CTV and PC monitor).
- Quality Assurance activities to achieve quality KPI and report to QA manager.
- Prepare document for ISO 9001 certificate system certified by BVQI, manage ISO 9001 system at the factory after ISO certified.
Education
Engineer - Electricity Engineering & Economic
Hanoi University of Science & Technology (HUST)
Skills
- 6 Sigma
- Auto CAD 2D
- Pro-Enginner 50 (3D design)
- Project management
- ISO lead auditor
- SPC
- Control Plan
- FMEA
- PPAP
- MSA
- DOE
- 8D
- Product and manufacturing flow diagrams
- Microsoft Project
- Microsoft Office
- Lean manufacturing
- Root cause analysis
- Troubleshooting
- Process control system
- Continuous improvement
- Problem solving
Traits
- Create and maintain process control system for factory
- Lead process continuously improve project
- Proven expertise of lean manufacturing
- Proven ability to quickly identify root cause and complete troubleshooting
- Provide short term solution and long-term solution for product issue
Personal Information
Title: Manufacturing Engineering Supervisor
Websites
Qualifications Skills Tools
- Training in 6 Sigma
- Auto CAD 2D
- ISO lead auditor
- Advanced user of variable quality tools including SPC, Control Plan, FMEA, PPAP, MSA, DOE, 8D, product and manufacturing flow diagrams
- PC software Microsoft project, office
Alias
alan chu
Timeline
Manufacturing Engineering Supervisor
Lairdtech Vietnam LLC.
07.2017 - Current
Production Analysis
Microsoft Mobile Vietnam LLC.
01.2015 - 07.2017
Technical Training Manager
Nokia Vietnam LLC.
05.2013 - 12.2014
Training Manager
Sumi-Hanel Wiring system Co., Ltd.
11.2002 - 05.2013
IT Specialist and Quantity Surveyor Engineer
Louis Berger International Inc.
05.1999 - 11.2002
OQC Team Leader
LG Electronic Vietnam
11.1997 - 04.1999
Engineer - Electricity Engineering & Economic
Hanoi University of Science & Technology (HUST)